HD Video Management Platform

Live browsing

Live screen display

Bring the camera live in the live window and display the live picture in real time.

Full-screen display

Double click on the live window, live full screen display

View template selection and switching

Users can switch between templates in different view templates

Live pane exchange

Drag live window 1 to the position of live window 2, live 1, 2 exchange display

Single pane and multi-pane switching

Switch to the multi-pane live after double-clicking on the single pane

Code stream switching

Double-click the live window to display the full screen, and the code stream is switched to the main stream.

Digital eagle eye

When browsing in real time, drag the mouse to achieve partial magnification

3D positioning

The mouse drags an area on the live camera screen, and the ball opportunities to perform 3D positioning on the area.

Proportional display and full pane display switching

In the live interface, right click on the mouse to select the scale switch pane display

Local capture

In the live window, click the snap button to capture the image and save it locally.

Local video

In the live window, click the local recording button to record locally and save it locally.

Automatic fogging

In the live window, click the automatic fog button to automate fogging.

Instant playback

Instantly play back the previous minute of the video in live

Support disconnection reconnection

After the camera is disconnected, it will automatically reconnect and continue to live.

Mouse scrolling zoom

Roll the mouse live, you can achieve camera live zoom

Support ePTZ

In the live interface, select the ePTZ of the spherical camera, click the mouse in the live window, and move the live screen.

Device tree supports camera fuzzy lookup

In the live tab, in the search window, enter the fuzzy camera name, it will automatically find the camera you are looking for.

The upper platform can view the lower platform camera live

After the upper and lower platforms are correctly associated, the lower platform can view the lower platform camera live.

The upper platform can operate the lower platform

When the upper and lower platforms are correctly associated, the lower platform can open the lower platform spherical camera, and can operate pan/tilt direction, rotation speed, and call the lower level preset position.

PTZ control

PTZ direction

After turning on the spherical control, select the spherical camera, and click the eight-direction button on the pan/tilt to control the camera in live direction.

Lens control

Adjustable control lens by zooming and focusing

Preset setting and calling

Select the position in the live state of the spherical camera, set the preset position, and the mouse selects the preset position to be called, and the live adjustment is automatically adjusted to the preset position.

Wiper

A camera with a wiper on the gimbal can turn on and off the wiper

PTZ speed

After turning on the ball machine, you can adjust the pan/tilt speed as needed.

Cruise track

Cruise track setup, recall and deactivation

Customize the preset position on the pan/tilt, set cruise, call and deactivate

Multiple track settings (path, time)

Different paths and times can be set when setting up cruise

layout

Layout creation and deletion

In the live screen, make the screen layout, click Save to complete the layout creation.

Layout enabled

In the live interface, select the desired layout and double-click to enable it.

Loop and switch

Create and delete groups

In the management interface, select the desired layout, save it to the corresponding cut, complete the creation of the loop, select the loop you can delete it.

Editing group editing

Select the loop group you want to edit, you can edit it

Start and stop

On the live tab, double-click to loop, turn on the loop, click stop, stop switch.

Manual control

Manually switch on/off/stop operation

Video

Support primary/secondary stream recording settings

On the Manage tab, select the camera and set the recording stream in the general settings.

Support direct connection / forwarding video settings

On the Manage tab, select the camera and set the direct and forward recording settings in the general settings.

Support video/playback path control

On the Manage tab, select the camera and set the control settings for the recording/playback number in the general settings.

Support plan recording and alarm recording

On the Manage tab, select the camera and set the settings for the scheduled recording and alarm recording.

Support for selecting video stream

On the Manage tab, select the camera, and select the stream for recording.

Support one-time, daily, weekly three types of recording plans

On the recording page, you can set a one-time recording plan, a daily recording plan, or a weekly recording plan according to your needs.

Create a recording plan

In the Recording Plan tab, you can create a recording plan for the desired camera.

Edit recording plan

Select the recording plan that needs to be edited to modify the camera and time period of the plan.

Delete recording plan

Select the recording plan, click delete, delete the recording plan

Newly added camera default full-day video

Add a camera to the management tab, enter the recording schedule tab, and view the camera to enable full-day recording by default.

Video retrieval/playback/export

Video search (by time and video type)

In the playback interface, select the camera you want to play back and the time period, click Search to bring up the playback video.

1x playback (supports playback, pause, stop, and seek)

In the lower right corner of the playback screen, support pause, stop, and seek operations

Variable speed playback (supports slow and fast release)

Support multiple playback in the lower right corner of the playback screen

View template selection

Select playback view templates of different specifications in the playback tab.

Full screen playback

Double-click the playback video to switch to full-screen playback.

Single screen/multi-screen switching

Double-click the single-screen full-screen playback video, switch to multi-screen playback, and then double-click to change back to single-screen playback.

Digital eagle eye

In the playback video, drag the mouse to achieve partial magnification

Video export

In the playback video, click the Export button to export the video.

Local capture

In the playback video, click the snap button to achieve local capture

Asynchronous playback

Go to the synchronous playback button to achieve asynchronous playback of the camera.

Double speed asynchronous playback

Check the playback camera to set different multiple playback

Video tag add delete

Recording can be added and deleted by clicking the corresponding button during playback.

Cascading camera playback

In the playback interface, select the cascade camera that needs to be played back and the time period, click on the search to play back the video.

Alarm

Honeywell Vista-120 alarm host access

Connect the Honeywell alarm host to the platform and configure it. The alarm source zone alarm can be reported to the platform after the alarm is started.

Johnson Control Fire Alarm Equipment Access

Connect the Johnson Controls fire alarm device to the platform and configure it. The alarm source zone alarm can be reported to the platform after departure.

Alarm level setting

Different levels of alarms can be set as needed.

Different levels of alarms are displayed in different colors

Alarms that are several times different can be displayed in different colors

Camera alarm connection

The camera is configured with an alarm configuration, and the triggered front-end alarm can be reported to the platform. (digital input, motion detection, cross-border detection, area intrusion detection, object legacy detection, audible alarm, induction alarm)

Linking client voice prompts

After the relevant alarm linkage client voice prompt is configured, when the camera alarm occurs, the voice is automatically played.

Linkage Email

After the camera alarm linkage Email is configured, when the camera alarm occurs, the alarm is automatically sent to the specified mailbox.

Linked live client

When the client selects the live pop-up automatically, when the live alarm is linked, the alarm screen automatically pops up to the client.

Linked live video wall

When the client selects the live pop-up automatically, when the live alarm is linked, the alarm screen automatically pops up to the video wall.

Linked video

After the relevant alarm linkage recording is configured, the camera will display an alarm, and the alarm screen will automatically start recording.

Linkage electronic map

After configuring the relevant alarm linkage electronic map, double-click the alarm information, it will automatically be associated with the relevant electronic map.

Linkage plan

When the relevant alarm linkage plan is configured, the camera will pop up automatically when an alarm occurs.

Linkage preset

When the relevant alarm linkage preset position is configured, when the camera displays an alarm, the pan/tilt automatically jumps to the corresponding preset position.

Alarm log query and export

In the alarm information display column, you can view the alarm log and right click to export the alarm log.

Abnormal alarm reporting of front-end equipment and servers

In the alarm information column, you can check the front-end device and server abnormal alarm.

Video diagnosis

Video diagnostic template add, edit, delete

On the Manage Video Diagnostics Server page, click Diagnostics Template to add, edit, and delete video diagnostic templates.

Video diagnostic plan add, edit, delete

On the Manage Video Diagnostics Server page, click Diagnostic Schedule to add, edit, and delete video diagnostic plans.

Video diagnosis results are reported in real time

After the video diagnosis plan is configured, the video diagnosis interface can view the diagnosis result in real time during the diagnosis time.

View historical diagnosis results

On the historical video diagnosis page, set the conditions, you can query the historical diagnosis results.

Diagnostic result export

Set the query conditions to export relevant diagnostic results

Diagnostic results support display in histogram and report form

Set the query conditions, you can choose to display the diagnosis results in a histogram or report form.

digital map

Support level map

Electronic map that supports a hierarchical pattern of N submaps under a main map

Add, delete, edit, replace maps, etc. of electronic maps

In the management of the electronic map interface, you can right-click the mouse to add, delete, edit, change, etc.

Zoom in, zoom out, pan

In the managed electronic map interface, zoom in, zoom out, and pan the map by clicking the corresponding button in the upper left corner.

Camera live, cloud control, snap shot, local video on the map

On the electronic map tab, double-click to select a spherical camera, and a live screen will appear. On this screen, you can perform pan/tilt control, snap capture, local video recording, etc.

GIS map

Camera add, delete, move

In the GIS map interface under management, you can add, delete, and move the camera by right-clicking the mouse.

Map zoom in, zoom out, pan

In the GIS map interface under management, zoom in, zoom out, and pan the map by clicking the corresponding button in the upper left corner.

voice

Accompanying voice

In the live interface, turn on the camera's voice and hear the front-end voice.

Voice intercom

In the live page, open the voice intercom, can achieve the client and camera intercom function

Mobile client

Cloud login and LAN login

Mobile client can log in via cloud and LAN

Live display

View the camera live through the mobile client login platform

Video view

Ability to view camera recordings via the mobile client login platform

Alarm access

Access camera alarm via mobile client login platform

Local recording and playback

Local recording and playback via mobile client login platform

Equipment management

Ability to manage devices through the mobile client login platform

Live full screen

View the live view in full screen through the mobile client login platform

PTZ control

PTZ control of the spherical can be achieved through the mobile client login platform

Soft decoding

Screen management and configuration

In the video matrix control center, you can perform screen recognition and layout by clicking the button such as recognition. (screen recognition, layout, etc.)

The soft solution server supports a variety of upper walls

In the video matrix control center, you can set the camera on the wall, layout the wall, cut the wall and the electronic map on the wall. (camera upper wall, layout upper wall, cut-and-cut wall, electronic map upper wall)

Decoding Control Center for automatic/manual switching

The decode control center is capable of automatic cutting, as well as manual opening, pause and stop cutting

Decoding control center synchronous start/stop TV wall cutting

In the video matrix control center, it can simultaneously turn on and off the cutting of all TV walls.

Decoding server restart to support scene recovery

In the video matrix control center, click the restart button to restart all TV wall screens.

Decoding Control Center Remote Reset/Restart Soft Solution Server

In the video matrix control center, click the reset/restart button to implement software server reset and restart.

The decoding control center automatically restarts and logs in when the central management service restarts.

After the central management server is restarted, the decoding control center automatically restarts and logs in.

The number of dongle control access screens

Control the number of screens connected to the video wall through the dongle

Soft stitching

AMD graphics card encoder supports soft stitching

Alarm on the TV wall

After the alarm is associated with the video wall, when an alarm occurs, it will automatically display on the TV wall.

Decode Control Center displays/processes alarm lists

When an alarm occurs, the alarm information can be displayed in the alarm control center alarm list and the right click processing alarm

Hard decoding

Decoder access and removal

In the management interface, add a decoder button, add a decoder, select the decoder to delete

Camera normal cut decoding

After the decoder is configured, the camera normally switches and decodes

Log management

Support alarm log, operation log and system log

In the management tab, select the log to query the alarm log, operation log, and system log.

Support log query

In the log in the management interface, set the query conditions, you can query related logs.

Support log export

In the log in the management interface, log export can be performed on the queried log.

Log export path configurable

When exporting logs, you can set the export path of the log.

User management

User add/delete/modify

In the management tab, the user can add/delete/modify the user by adding/deleting/modifying

Support different levels / permissions users

Can set different user levels and permissions

Support camera for user-visible management

For the same camera, you can set the operation rights of different users.

Support PTZ user level / user controllable

For the same camera, you can set the control permissions of different users to the PTZ.

Camera management

Camera added manually

In the Manage tab, click the Add Camera button, enter camera information, and manually add the camera.

Camera added in batches

According to the template, set the camera information that needs to be added in batches. On the Manage tab, click the Add Camera button to import the template for camera addition.

Camera scan added

In the Manage tab, after clicking the Add Camera button, a camera scan is performed on the page to add a scanned camera.

Camera status update

The platform automatically updates the camera's real-time status

Camera clock synchronization

Camera time and platform time synchronization

OSD settings

Select the camera in the management interface, click on the information overlay, you can superimpose the OSD information on the camera.

Set camera parameters

Select the camera in the management interface and set the camera on the right side.

View camera information

Select the camera in the management interface, and you can view the camera related parameters on the right side.

Camera parameter copy

Select the camera in the management interface and click "Copy to other camera" to copy the camera parameters.

Camera name modification

Select the camera in the management interface, you can enter a new camera name in the camera name on the right, click Save to modify the camera name.

Camera grouping (add/delete/edit)

Camera grouping can be created, edited, and deleted in the camera grouping of the management interface

Support camera grouping hierarchy

Click Add Camera Group on the added camera group to group and group

Streaming media forwarding

First-level forwarding

In the device proxy server of the management page, you can configure one-level forwarding.

Secondary forwarding

Configurable secondary forwarding in the device proxy server on the administration page

Secondary forwarding flow control

Configurable secondary forwarding flow control in the device proxy server on the management page

System Management

User login/logout

Double-click the client, enter the user name, password and other information to log in; after logging in, click the small fork in the upper right corner to log out

Client lock

After logging in to the client, click on the lock in the upper right corner to lock the client.

Fingerprint landing

After logging in the fingerprint, the user can log in by fingerprint.

Client login automatically

When logging in to the client, check the next automatic login, the next time you automatically log in to the client.

Client user information customization

More user information is required when logging in to the client for the first time.

Client system information display

After logging in to the client, click on the information in the upper right corner to view the client system information.

System version query

After logging in to the client, click About in the upper right corner to view the client version information.

System anti-sleep

After the system is installed and running, the server enters the anti-sleep state.

Dongle information inquiry

Information such as the number of camera channels added to the platform

Each server has a watchdog anti-server abnormal exit

The service process exits abnormally and the watchdog can start the process immediately.